June 16, 200520 yr Heres the mod ive been working on for a while Ill keep this thread up to date as I add and change things the first pic is my external water cooler thats 4 120mm fans the switchs on the front change the ground from 0 , -5v and -12v for the fans running at 100% normal speed 140% faster than normal and 200% faster than normal (ya 24v fans are really really loud) the second is a pic of the case im working with the only thing ive moded so far is the power button it heres a before pic http://www.clearcomputercase.com/photos/SPECKS/1310-front.JPG heres the switch im using http://www.xoxide.com/vl-system-touch-one.html it doesnt move and somehow senses your electricty i only had to dremel the back of it so the cable didnt go out the side and made it so it goes straight out the back the last pic is that of the fans im using there all aluminum and i soldered the correct lenght wires i wanted and sleved them and than ran the sleeves through some plastic tubing on the other end i soldered on a mini audio jack and heatshinked that on ill show you what that plugs into later /monthly_06_2011/post-20-130810173573_thumb.jpg /monthly_06_2011/post-20-13081017358_thumb.jpg /monthly_06_2011/post-20-130810173583_thumb.jpg
June 16, 200520 yr Looking very good there Killer. I like the flip switches on the front of your case. :cool:
June 16, 200520 yr Author i think i just voided my dual layer dvd burners warranty but im not sure edit* and here it is with the molding now i just need to order some thin acrylic /monthly_06_2011/post-20-130810173589_thumb.jpg /monthly_06_2011/post-20-130810173593_thumb.jpg
June 17, 200520 yr Wow, that is one seriously fancy power switch there. The company's comments at the end of the description was hilarious But I hope everything works out well for you.
June 17, 200520 yr Author i did hook the swicth up to make sure it worked and i must say its one of the coolest modding things ive seen in a long time it has a really long cord so you could hook this up almost any where (its like 5ft long) the board is made so it could fit in a pci slot and the switch would plug into the back of your comp and you could put the switch on your desk if you wanted any way im working on my little power box this is where im gonna hide all the cables i dont need the first pic is the conectors im using instead of molexs the second one is all the phono jacks im using this is where all my fans plug in (theres a fex extra those will be all 5v for leds) and the last pic is the inside of the box /monthly_06_2011/post-20-1308101736_thumb.jpg /monthly_06_2011/post-20-130810173604_thumb.jpg /monthly_06_2011/post-20-130810173607_thumb.jpg
June 17, 200520 yr Author got the plugs hooked up now i just have to solder /monthly_06_2011/post-20-13081017361_thumb.jpg
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.